APPLICATION & COMPONENTS

Conveying & auxiliary wear parts

Find drawing-specified bronze guides, flanged bushings, thrust parts and transmission blanks.

Mining & Aggregates

Locate the part.
Define the requirements.

Select a component group below.

For auxiliary equipment, define the motion, dust exposure, load and lubricant at the actual sliding interface.

Generated images illustrate the context and component categories. They are not Zhiren project photographs or engineering drawings.

Select a group. Identify your part.

Choose a component to view its function, material candidates and drawing requirements.

Illustrative component locations: Sliding & locating

Numbered locations identify component-family examples. Illustrations do not define dimensions, material grade or interchangeability.

Conceptual part illustration

COMPONENT GUIDE

Thrust washer / thrust ring

Local axial support and clearance-control interface.

Provides a drawing-defined axial contact or replaceable wear face.

Manufacturing & delivery form
Cast ring blank or machining from suitable stock; route to be agreed.

A washer or ring is a component of the arrangement, not a complete thrust bearing.

Material candidates

UNS C93200 Leaded tin bronze

Candidate for lubricated bushings, bearings and thrust interfaces.

Contains lead. Confirm load, speed, shaft condition and lubrication; no dry-running capability is implied.

UNS C95400 Aluminium bronze

Candidate for drawing-defined loaded sliding and wear components.

Review mating material, lubrication and supply condition. C95400 and C95800 are distinct grades.

UNS C86300 Manganese brass / manganese bronze

Candidate for specified heavily loaded sliding parts and nut blanks.

A high-strength brass family, not tin bronze. Confirm the counterface and lubrication; no universal wear-life claim applies.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Ring geometry: Inside/outside diameters, thickness, steps and locating details.
Contact faces: Flatness, parallelism, finish and mating materials.
Axial duty: Axial load, relative sliding speed and alignment conditions.
Lubrication: Oil holes, grooves, lubricant and operating temperature.
Material & acceptance: Specified alloy and standard, supply condition, drawing revision, quantity, inspection criteria and required records.
Supply form: Cast ring blank or machining from suitable stock; route to be agreed.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry Open component specification guide

Conceptual part illustration

COMPONENT GUIDE

Guide wear plate

Replaceable sliding face in an auxiliary guide mechanism.

Provides a specified contact surface between sliding components.

Manufacturing & delivery form
Plate casting or cast-stock blank with agreed face machining.

This is a sliding wear plate, not a direct ore-impact crushing liner. C93200 is only a candidate for suitable lubricated lower-load positions.

Material candidates

UNS C95400 Aluminium bronze

Candidate for drawing-defined loaded sliding and wear components.

Review mating material, lubrication and supply condition. C95400 and C95800 are distinct grades.

UNS C86300 Manganese brass / manganese bronze

Candidate for specified heavily loaded sliding parts and nut blanks.

A high-strength brass family, not tin bronze. Confirm the counterface and lubrication; no universal wear-life claim applies.

UNS C93200 Leaded tin bronze

Candidate for lubricated bushings, bearings and thrust interfaces.

Contains lead. Confirm load, speed, shaft condition and lubrication; no dry-running capability is implied.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Plate geometry: Length, width, thickness, recesses and mounting-hole positions.
Contact pair: Counterface material, contact area, surface finish and flatness.
Sliding duty: Contact load, speed, travel and movement direction.
Service conditions: Lubrication, dust, contamination and temperature.
Material & acceptance: Specified alloy and standard, supply condition, drawing revision, quantity, inspection criteria and required records.
Supply form: Plate casting or cast-stock blank with agreed face machining.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry Open component specification guide

Illustrative component locations: Transmission blanks

Numbered locations identify component-family examples. Illustrations do not define dimensions, material grade or interchangeability.

Conceptual part illustration

COMPONENT GUIDE

Bronze gear blank

Auxiliary transmission with a drawing-specified bronze gear or rim.

Provides a blank for subsequent gear machining and assembly.

Manufacturing & delivery form
Cast solid or ring blank with agreed premachining; tooth cutting specified separately.

Assess a bronze gear blank only when the approved transmission drawing specifies bronze; other gear materials require a separate scope.

Material candidates

UNS C90500 Tin bronze

Candidate for drawing-defined gear blanks and selected lubricated components.

Confirm the governing standard, casting form and duty. C90500 and C90700 are distinct grades.

UNS C90700 Tin bronze

Candidate for gear and worm-wheel blanks.

Confirm the mating gear, lubrication and machining scope. An alloy designation does not establish finished gear accuracy.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Blank geometry: Rim/hub arrangement, bore, outside diameter and casting envelope.
Machining definition: Datums, stock allowance, tooth-machining responsibility and final inspection scope.
Mating design: Connected hub and mating gear or worm drawing.
Drive duty: Load, speed, lubricant and required hardness condition.
Material & acceptance: Specified alloy and standard, supply condition, drawing revision, quantity, inspection criteria and required records.
Supply form: Cast solid or ring blank with agreed premachining; tooth cutting specified separately.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry Open component specification guide

All component guides in this application 4 component entries

Open a guide directly, including parts from the other equipment groups.

Thrust washer / thrust ringComponent guide

Flanged bushingComponent guide

Guide wear plateComponent guide

Bronze gear blankComponent guide

FURTHER GUIDANCE

Prepare the technical RFQ.

Alloy reference

Review tin-bronze grades.

Compare reference grades and composition in the alloy catalogue. Use the approved component specification to determine the required alloy and service suitability.

Explore the alloy reference

Conveying & auxiliary wear parts

Locate the part.Define the requirements.

Select a group. Identify your part.

Prepare the technical RFQ.

Review tin-bronze grades.

Locate the part.
Define the requirements.