COMPONENT REQUIREMENTS

Pump impeller

Define the geometry, material, delivery condition and acceptance criteria for the selected application. Manufacturing scope requires review of the approved drawing and operating requirements.

Generated component illustration. It is not a Zhiren product photograph or an engineering drawing; final geometry follows the controlled drawing.

COMPONENT GUIDE

Pump impeller

Centrifugal-pump wet end

The rotating hydraulic component follows the specified vane, hub and shaft geometry.

Manufacturing & delivery form
Impeller casting with hub machining; balancing scope agreed separately.

An alloy designation does not guarantee pump efficiency, head or freedom from cavitation.

Material candidates

UNS C90500 Tin bronze

A candidate for drawing-specified pump, valve and friction components.

Candidate for drawing review only. Confirm medium, loading, manufacturing condition and the governing standard. Zhiren availability is unconfirmed.

UNS C95800 Nickel aluminium bronze

A candidate for specified saline-water and wear components.

Candidate for drawing review only. Review water chemistry, flow, mating metals and casting condition; no corrosion or cavitation guarantee. Zhiren availability is unconfirmed.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Hydraulic geometry: Open or closed design, vane profile, inlet eye, hub and minimum sections.
Shaft fit: Bore, keyway, rotation, speed and mating-ring clearances.
Finishing & balance: Surface finish, machining allowances, inspection and balancing criteria with the responsible party.
Material specification: Alloy grade, governing standard and revision, manufacturing condition and any restricted substances.
Order & acceptance: Approved drawing revision, quantity, blank or machined delivery, inspection criteria and required records.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry

FURTHER GUIDANCE

Prepare the technical RFQ.

Alloy reference

Review tin-bronze grades.

Compare reference grades and composition in the alloy catalogue. Use the approved component specification to determine the required alloy and service suitability.

Explore the alloy reference