COMPONENT REQUIREMENTS

Cast grounding clamp body

Define the geometry, material, delivery condition and acceptance criteria for the selected application. Manufacturing scope requires review of the approved drawing and operating requirements.

Generated component illustration. It is not a Zhiren product photograph or an engineering drawing; final geometry follows the controlled drawing.

COMPONENT GUIDE

Cast grounding clamp body

Ground conductor-to-equipment or electrode connection

Provides the specified fixed clamping interface in a grounding connection.

Manufacturing & delivery form
Clamp casting with thread and contact-face machining; route confirmed per drawing.

Clamp material alone does not establish grounding-system conformity.

Material candidates

UNS C87600 Cast copper-silicon alloy

A candidate for drawing-specified connection or support components.

Candidate for drawing review only. Confirm functional requirements and casting condition; do not substitute wrought copper-silicon or brass grades by family name. Zhiren availability is unconfirmed.

UNS C81100 Cast copper

A candidate for drawing-specified conductive cast components.

Candidate for drawing review only. Confirm finished-part conductivity and contact geometry; purity alone does not establish assembly performance. Zhiren availability is unconfirmed.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Connection layout: Conductor and electrode types, diameters, interface geometry and fasteners.
Mechanical & environment: Clamping criteria, exposure, connected metals and corrosion conditions.
Electrical acceptance: Required connection-resistance checks, product requirements and test responsibility.
Material specification: Alloy grade, governing standard and revision, manufacturing condition and any restricted substances.
Order & acceptance: Approved drawing revision, quantity, blank or machined delivery, inspection criteria and required records.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry

FURTHER GUIDANCE

Prepare the technical RFQ.

Drawing preparation

Define the delivery scope.

Provide the approved drawing or model, specified material and quantity. Identify the required casting, machining, surface treatment and final equipment validation, with responsibility assigned for each.

Prepare your enquiry