COMPONENT REQUIREMENTS

Thrust bearing ring

Define the geometry, material, delivery condition and acceptance criteria for the selected application. Manufacturing scope requires review of the approved drawing and operating requirements.

Generated component illustration. It is not a Zhiren product photograph or an engineering drawing; final geometry follows the controlled drawing.

COMPONENT GUIDE

Thrust bearing ring

Low-speed axial sliding contact or clearance-control position.

Provides a specified axial contact surface or replaceable washer.

Manufacturing & delivery form
Ring blank or machining from suitable plate/tube stock; route to be agreed.

This component is separate from a complete rolling thrust bearing. Identify the ring or washer by its drawing.

Material candidates

UNS C93200 Leaded tin bronze

Candidate for lubricated bushings, bearings and thrust interfaces.

Contains lead. Confirm load, speed, shaft condition and lubrication; no dry-running capability is implied.

UNS C95400 Aluminium bronze

Candidate for drawing-defined loaded sliding and wear components.

Review mating material, lubrication and supply condition. C95400 and C95800 are distinct grades.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Ring dimensions: Inside/outside diameter, thickness, grooves and retaining details.
Face quality: Flatness, parallelism, finish and mating-face geometry.
Axial contact: Load, contact area, sliding speed and alignment.
Lubrication: Lubricant, feed path and temperature at the contact.
Material & acceptance: Specified alloy and standard, supply condition, drawing revision, quantity, inspection criteria and required records.
Supply form: Ring blank or machining from suitable plate/tube stock; route to be agreed.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry

FURTHER GUIDANCE

Prepare the technical RFQ.

Alloy reference

Review tin-bronze grades.

Compare reference grades and composition in the alloy catalogue. Use the approved component specification to determine the required alloy and service suitability.

Explore the alloy reference