Facility water & CDU primary side

Illustrative component locations: Pump housing study

Numbered locations identify component-family examples. Illustrations do not define dimensions, material grade or interchangeability.

Conceptual part illustration

COMPONENT GUIDE

Liquid-cooling pump housing

Customer-defined FWS or CDU pump position; TCS use requires separate approval

A development assessment for a pressure-containing pump housing where the equipment owner explicitly accepts a copper-alloy route.

Manufacturing & delivery form
Potential complex casting with machining and cleaning, subject to route and sample approval.

No default copper-casting grade or established Zhiren CDU supply is confirmed. Actual equipment may use stainless steel or another approved material.

Material candidates

UNS C90500 Tin bronze

A candidate for specified pump and valve components.

Development candidate only. Obtain written customer approval for the alloy and manufacturing route, then validate the actual coolant, complete wetted-material set, cleanliness and leakage requirements. This grade has no assumed approval for a technology cooling system.

UNS C89833 Bismuth tin bronze

A low-lead alternative to consider where the customer approves the material and manufacturing route.

Development candidate only. Obtain written customer approval for the alloy and manufacturing route, then validate the actual coolant, complete wetted-material set, cleanliness and leakage requirements. This grade has no assumed approval for a technology cooling system.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Loop identity: Identify facility water system (FWS) or technology cooling system (TCS), primary/secondary side and approved equipment drawing.
Coolant and wetted materials: Supply the full coolant specification, water quality, metals, coatings, seals and written material approval.
Housing geometry: Define flow passage, wall sections, port/seal interfaces, machining datums and access for internal cleaning.
Cleanliness criteria: Specify particles, metal-ion release, process residues, internal-surface acceptance and cleaning/packaging verification.
Pressure and sample approval: Define temperature/pressure duty, leakage method/limits, sample plan and component-versus-loop validation responsibilities.
Delivery scope: State accepted casting route, blank or machined form, quantity, material records and change-control requirements.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry Open component specification guide

Illustrative component locations: Valve body study

Numbered locations identify component-family examples. Illustrations do not define dimensions, material grade or interchangeability.

Conceptual part illustration

COMPONENT GUIDE

Liquid-cooling valve body

Customer-approved regulating or isolation point on a facility-water or CDU circuit

A drawing-led assessment of a valve body, its wetted surfaces and manufacturing route.

Manufacturing & delivery form
Potential body casting with machining, cleaning and project-specific validation.

Low lead does not establish low ion release or liquid-cooling compatibility. Ordinary water-valve experience is not sufficient approval for a TCS material.

Material candidates

UNS C89833 Bismuth tin bronze

A low-lead alternative to consider where the customer approves the material and manufacturing route.

Development candidate only. Obtain written customer approval for the alloy and manufacturing route, then validate the actual coolant, complete wetted-material set, cleanliness and leakage requirements. This grade has no assumed approval for a technology cooling system.

UNS C90500 Tin bronze

A candidate for specified pump and valve components.

Development candidate only. Obtain written customer approval for the alloy and manufacturing route, then validate the actual coolant, complete wetted-material set, cleanliness and leakage requirements. This grade has no assumed approval for a technology cooling system.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Valve and loop definition: Provide valve function, flow direction, loop identity and OEM-approved drawing revision.
Material approval: List every wetted metal, coating and seal, coolant chemistry and the customer's allowable material/processing routes.
Seat and interfaces: Define seat datums, body/bonnet joint, connections, sealing surfaces and machining allowance.
Cleanliness and release: Specify particle, residue and ion-release criteria, cleaning verification and protective packaging.
Leakage and duty: Provide temperature/pressure, leak-test method and limits, sample approval and complete-valve test responsibility.
Deliverable: Define casting/alternative route, machining scope, quantity, traceability and permitted material or process changes.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry Open component specification guide

Illustrative component locations: Filter housing study

Numbered locations identify component-family examples. Illustrations do not define dimensions, material grade or interchangeability.

Conceptual part illustration

COMPONENT GUIDE

Liquid-cooling filter housing

Specified filtration location on a CDU or facility-water circuit

A housing-route study around the OEM's filter element, service access and contamination-control requirements.

Manufacturing & delivery form
Potential complex casting with machining and cleaning; compare approved stainless-steel or other routes.

Filtration performance belongs to the complete filter design. Submit the approved housing material and manufacturing specification; copper alloy is not a default selection.

Material candidates

UNS C89833 Bismuth tin bronze

A low-lead alternative to consider where the customer approves the material and manufacturing route.

Development candidate only. Obtain written customer approval for the alloy and manufacturing route, then validate the actual coolant, complete wetted-material set, cleanliness and leakage requirements. This grade has no assumed approval for a technology cooling system.

UNS C81100 Cast copper

A possible manufacturing-study material only after the customer accepts a cast-copper route.

Development candidate only. Obtain written customer approval for the alloy and manufacturing route, then validate the actual coolant, complete wetted-material set, cleanliness and leakage requirements. This grade has no assumed approval for a technology cooling system.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Filter location and element: Identify FWS/TCS side, element design, removal access, retention and filter-seat geometry.
Material and coolant: Provide the approved wetted-material list, coolant composition and accepted housing manufacturing routes.
Housing layout: Define passages, ports, cover joint, wall sections, machining datums and internal access.
Contamination criteria: Specify particle limits, residual machining/casting material, surface acceptance and cleaning verification.
Sealing acceptance: Define operating conditions, cover-seal requirements, leak-test method/limits and verification responsibility.
Sample release: Provide prototype quantities, material and inspection records, packaging and customer approval gates.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry Open component specification guide

Illustrative component locations: Distribution housing study

Numbered locations identify component-family examples. Illustrations do not define dimensions, material grade or interchangeability.

Conceptual part illustration

COMPONENT GUIDE

Flow-distribution housing

Drawing-defined multiport distribution position within approved equipment

A development study for a compact multiport body whose passages and cleaning access may support a casting route.

Manufacturing & delivery form
Assess castability and internal cleaning before machining and washing; compare machined-block and fabricated alternatives.

A welded, additively made or machined distributor must not be labelled an investment casting. No residue-free result is presumed.

Material candidates

UNS C81100 Cast copper

A possible manufacturing-study material only after the customer accepts a cast-copper route.

Development candidate only. Obtain written customer approval for the alloy and manufacturing route, then validate the actual coolant, complete wetted-material set, cleanliness and leakage requirements. This grade has no assumed approval for a technology cooling system.

UNS C89833 Bismuth tin bronze

A low-lead alternative to consider where the customer approves the material and manufacturing route.

Development candidate only. Obtain written customer approval for the alloy and manufacturing route, then validate the actual coolant, complete wetted-material set, cleanliness and leakage requirements. This grade has no assumed approval for a technology cooling system.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Passage and port map: Supply all branches, connections, wall sections, flow directions and the approved 3D/section drawings.
Route approval: Confirm whether casting is allowed and identify the baseline machined or fabricated design for comparison.
Internal access: Define core/shell removal access, enclosed passages, inspection access and internal-surface acceptance.
Wetted compatibility: Specify coolant, loop identity, material/coating/seal set and the customer's written alloy approval.
Cleaning and leak checks: Define particle, ion and residue limits, cleaning evidence, leak method/limits and responsible parties.
Prototype decision: Set sample quantity, acceptance gates, traceability and any flow-distribution validation before production approval.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry Open component specification guide

Locate the part.
Define the requirements.

Select a group. Identify your part.

Prepare the technical RFQ.

Review tin-bronze grades.

Facility water & CDU primary side

Locate the part.Define the requirements.

Select a group. Identify your part.

Prepare the technical RFQ.

Review tin-bronze grades.

Locate the part.
Define the requirements.