COMPONENT REQUIREMENTS

Transformer bushing terminal

Define the geometry, material, delivery condition and acceptance criteria for the selected application. Manufacturing scope requires review of the approved drawing and operating requirements.

Generated component illustration. It is not a Zhiren product photograph or an engineering drawing; final geometry follows the controlled drawing.

COMPONENT GUIDE

Transformer bushing terminal

Metal connection at an electrical bushing end

Connects the bushing conductor to the specified external conductor.

Manufacturing & delivery form
Copper terminal casting with agreed threads and contact-face machining.

This is a metal terminal, not the ceramic/composite insulator or complete bushing assembly.

Material candidates

UNS C81100 Cast copper

A candidate for drawing-specified conductive cast components.

Candidate for drawing review only. Confirm finished-part conductivity and contact geometry; purity alone does not establish assembly performance. Zhiren availability is unconfirmed.

UNS C81500 Cast chromium copper

A candidate where the design calls for a balance of conductivity and mechanical properties.

Candidate for drawing review only. Confirm heat treatment, delivery condition and actual inspection results; it is not wrought C18150. Zhiren availability is unconfirmed.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Terminal interfaces: Connection profile, conductor bore, thread details and mating dimensions.
Conductive acceptance: Specified alloy condition, finished-part conductivity and contact-resistance criteria.
Surface & sealing: Coating, face finish, any sealing interface and assignment of assembly tests.
Material specification: Alloy grade, governing standard and revision, manufacturing condition and any restricted substances.
Order & acceptance: Approved drawing revision, quantity, blank or machined delivery, inspection criteria and required records.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry

FURTHER GUIDANCE

Prepare the technical RFQ.

Drawing preparation

Define the delivery scope.

Provide the approved drawing or model, specified material and quantity. Identify the required casting, machining, surface treatment and final equipment validation, with responsibility assigned for each.

Prepare your enquiry