COMPONENT REQUIREMENTS

Conductor connection block

Define the geometry, material, delivery condition and acceptance criteria for the selected application. Manufacturing scope requires review of the approved drawing and operating requirements.

Generated component illustration. It is not a Zhiren product photograph or an engineering drawing; final geometry follows the controlled drawing.

COMPONENT GUIDE

Conductor connection block

Fixed conductive path in switchgear

Provides the specified mounting and contact interfaces for a conductive connection.

Manufacturing & delivery form
Shaped copper casting with critical-face machining, subject to drawing review.

System temperature rise cannot be guaranteed from copper purity alone.

Material candidates

UNS C81100 Cast copper

A candidate for drawing-specified conductive cast components.

Candidate for drawing review only. Confirm finished-part conductivity and contact geometry; purity alone does not establish assembly performance. Zhiren availability is unconfirmed.

UNS C81500 Cast chromium copper

A candidate where the design calls for a balance of conductivity and mechanical properties.

Candidate for drawing review only. Confirm heat treatment, delivery condition and actual inspection results; it is not wrought C18150. Zhiren availability is unconfirmed.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Contact geometry: Contact areas, flatness, fastener holes and machining datums.
Material condition: Grade, heat treatment where specified, hardness and finished-part conductivity criteria.
Assembly verification: Contact pressure, operating duty and responsibility for resistance and temperature-rise checks.
Material specification: Alloy grade, governing standard and revision, manufacturing condition and any restricted substances.
Order & acceptance: Approved drawing revision, quantity, blank or machined delivery, inspection criteria and required records.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry

FURTHER GUIDANCE

Prepare the technical RFQ.

Drawing preparation

Define the delivery scope.

Provide the approved drawing or model, specified material and quantity. Identify the required casting, machining, surface treatment and final equipment validation, with responsibility assigned for each.

Prepare your enquiry