COMPONENT REQUIREMENTS

Electrical terminal body

Define the geometry, material, delivery condition and acceptance criteria for the selected application. Manufacturing scope requires review of the approved drawing and operating requirements.

Generated component illustration. It is not a Zhiren product photograph or an engineering drawing; final geometry follows the controlled drawing.

COMPONENT GUIDE

Electrical terminal body

Fixed cable-to-equipment connection

Locates the conductor and its drawing-defined fastening/contact interfaces.

Manufacturing & delivery form
Terminal-body casting with agreed machining and surface treatment.

Spring contacts, contact coatings and complete terminal systems are separate scopes.

Material candidates

UNS C81100 Cast copper

A candidate for drawing-specified conductive cast components.

Candidate for drawing review only. Confirm finished-part conductivity and contact geometry; purity alone does not establish assembly performance. Zhiren availability is unconfirmed.

UNS C81500 Cast chromium copper

A candidate where the design calls for a balance of conductivity and mechanical properties.

Candidate for drawing review only. Confirm heat treatment, delivery condition and actual inspection results; it is not wrought C18150. Zhiren availability is unconfirmed.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Cable interface: Conductor form, bore, cable-contact geometry and fastening arrangement.
Electrical acceptance: Finished-part conductivity, contact resistance and specified test method.
Surface & assembly: Coating, contact-face finish, mechanical fastening and inspection responsibility.
Material specification: Alloy grade, governing standard and revision, manufacturing condition and any restricted substances.
Order & acceptance: Approved drawing revision, quantity, blank or machined delivery, inspection criteria and required records.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry

FURTHER GUIDANCE

Prepare the technical RFQ.

Drawing preparation

Define the delivery scope.

Provide the approved drawing or model, specified material and quantity. Identify the required casting, machining, surface treatment and final equipment validation, with responsibility assigned for each.

Prepare your enquiry