COMPONENT REQUIREMENTS

Worm wheel blank

Define the geometry, material, delivery condition and acceptance criteria for the selected application. Manufacturing scope requires review of the approved drawing and operating requirements.

Generated component illustration. It is not a Zhiren product photograph or an engineering drawing; final geometry follows the controlled drawing.

COMPONENT GUIDE

Worm wheel blank

Bronze worm-wheel position in a reducer or low-speed drive.

Provides the blank from which a specified worm wheel is machined.

Manufacturing & delivery form
Cast solid or ring blank with agreed premachining; tooth cutting specified separately.

A blank is separate from a finished worm wheel. Tooth accuracy and life require the complete drive and finishing specification.

Material candidates

UNS C90700 Tin bronze

Candidate for gear and worm-wheel blanks.

Confirm the mating gear, lubrication and machining scope. An alloy designation does not establish finished gear accuracy.

UNS C90500 Tin bronze

Candidate for drawing-defined gear blanks and selected lubricated components.

Confirm the governing standard, casting form and duty. C90500 and C90700 are distinct grades.

Confirm the drawing, actual duty, material standard and manufacturing condition. Material substitutions require customer approval, and supply scope is agreed after component review.

Component RFQ requirements

Blank structure: Hub/rim configuration, outside diameter, bore, web and drawing revision.
Machining plan: Datums, stock allowance, tooth-cutting responsibility and final acceptance.
Mating worm: Worm drawing, material, interface and specified alignment.
Drive conditions: Load, speed, lubricant and required hardness condition.
Material & acceptance: Specified alloy and standard, supply condition, drawing revision, quantity, inspection criteria and required records.
Supply form: Cast solid or ring blank with agreed premachining; tooth cutting specified separately.

Start with your drawing, specified alloy and quantity. Include the required delivery condition and acceptance records so the manufacturing and inspection scope can be reviewed.

Prepare a component enquiry

FURTHER GUIDANCE

Prepare the technical RFQ.

Alloy reference

Review tin-bronze grades.

Compare reference grades and composition in the alloy catalogue. Use the approved component specification to determine the required alloy and service suitability.

Explore the alloy reference